RECTANGUL AR STEEL CROSSARM
Hot Dip Galvanized
The B01 serles VIC Steel Cross Arm are used either for cross arm construction or sidearm construction for single phase to three phase circuit application(13.8 kV to 69 kV). mounting holes are predrilled with the power utility cross arm-driling guide.
VERTICAL SIDEARM BRACE
Hot Dip Galvanized
Three VIC braces are used for sidearm construction and double primary support either for 13.2 kV to 69 kV circuit applic ation.
ALLEY ARM BRACE
Hot Dip Galvanized
Alley Arms, cross arms m ounted to one side of the pole, mount at a 45-degree angle and come complete with solidly riveted lineman step. These braces are mounted to the side ofthe arm by a machine bolt and attached to the pole with two 1/2 inch machine bolt or lag screw.
ANGLE BRACE
Hot Dip Galvanized
The VIC tow-piece and one-piece double span angle brace are used to support heavy Cross arm Construction. Braces are attached to the undersize of the crOSS arm with 1 12 inch bolts or lag screws and fastened to the pole with a 5/8 inch bolt.
FLAT CROSSARM BRACES
Hot Dip Galvanized
Flat cross arm braces, used in pairs, are an inexpensive means of aligning and supporting cross arms. Mounting hole diameters are 7/16 inch for 3/8 inch cross arm mounting bolts and 9/16 inch for pole mounting with a 1 12 inch lag screw or machine bolt. Hole centers are 1 inch from the brace ends .
ANGLE BRACE DOUBLE SPAN
Hot Dip Galvanized
The VIC one piece double span brace are used to support heavy cross am construction. Braces are attached to the underside of the Cross arm with 1 12 inch machine bolt or lag screw and fastened to the pole with a 5/8 inch machine bolt.
DIAGONAL BRACE
Hot Dip Galvanized
The VIC Diagonal and Back Braces are extension fixtures used as tension member of alley arms to compensate for unbalanced load.