Application
LR1 series thermal overload relay are suitable for overload and phase-failure protection of AC motors with frequency of 50/60Hz,voltage up to 690v,current up to 0.1-80A under 8-hours duty or uninterrupted duty.
Functions provided by these relays, are phase-failure protection, ON/OFF indication, temperature
compensation, and manual/automatic reset.
Applicable Standards: National Standard: GB 14048. Intermational Standards: IEC 60947-4-1
The relays can be mounted onto contactors or installed as single units.
Operating Conditions
The altitude couldn’ t exceed 2000m.
Ambient temperature: -5 C~+55C and the average temperature no more than +35C in 24 hours.
Atmosphere: Comparative humidity no more than 50% at max +40C, and it may be higher at a
lower temperature. The lowest average temperature no more than +20C in the wettest month.
The maximum average comparative humidity of this month couldn’t exceed 90%, The change
of temperature leading to dew on the product must be considered.
Class of pollution: Class 3.
The slope between installation surface and vertical surface couldn’t exceed±5°.
Keeping away from explosive, corrosive and electric atomy.
Keeping dry.
The product should be used and installed at certain place without any shock, vibration etc.