Short Description:

1, the connector is made of high conductivity, high density of copper cold pressing, and silver plating

treatment, after non-magnetic spring binding, do not need the inner skeleton, to avoid the formation of

electric field eddy current caused by the binding spring heating aging, resulting in small contact pressure.
2. The connecting port of copper parts and the circular rod type contact of the connection cover are in

circular linear contact to increase the contact surface and better ensure the flow capacity of the conductor.

The conductive contact is connected with three spherical sections, which can be rotated 30 degrees and

360 degrees to avoid the difficulty of combining cabinets caused by errors between cabinets.
3. The outer insulation of the connector is made of silicone rubber, and the inner wall is fully insulated and

shielded.
4. After the switch cabinet is installed, insert the bus connector into the cabinet, and push the cabinet together

to form a connection, which meets the requirements of users for any connection and combination.
5, after the use of bus connector, because the inflatable cabinet can be arbitrarily connected and combined,

complete sets of switch cabinet enterprises can carry out inventory production before the contract is signed,

after the contract is signed, can be delivered in time, simple and convenient installation, can form a single

cabinet batch standardized production to reduce production costs. Technical parameters: rated voltage: 12(24)KV

rated current: 630A, instantaneous current: 20(31.5)KA operating temperature: -40℃~50℃.